The new HydraForce SVCL and SPCL series valves offer the unique capability of providing integral piloting or load-signaling in a solenoid-operated on/off or proportional cartridge valve. Patents are pending for these unique and innovative new valves, allowing us to offer the most advanced, high-performance hydraulic circuits in the industry.
The SVCL and SPCL products are initially released in the 10-size version, using the common VC10-3 cavity profile with a modified pre-drill as shown in the catalog. Other sizes are in development which will allow a flow range capability up to 40 gpm or 151 lpm. Rated operating pressure is 3625 psi / 250 bar while the load-holding port 1 is capable of 5000 psi / 350 bar maximum pressure and is qualified to 4:1 burst pressure per ANSI test specifications.
The SVCL valves use HydraForce D-Series and E-series coils with various connector options. E-series environmental coils are rated IP69K. They have been extensively tested and approved under severe mobile machinery application conditions. Coil test and option details are available at
SVCL10 and SPCL10 Valves:
β’ System Operating Pressure: 3625 psi / 250 bar
β’ Holding Pressure: 5000 psi / 350 bar at Port 1
β’ Rated Flow: 15 gpm / 56.9 lpm @ 175 psi / 12 bar differential for SVCL @ 225 psi / 15.5 bar
differential for SPCL
β’ Leakage: 5 drops per minute
β’ Cavity: VC10-3 with modified pre-drill
::Design World::
